Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 339

FABR-1045 5 FABR-1045 Message Detected Base Switch conflict with remote (not neighbor) switch (domain ), BS . No local E_Ports disabled. Message Type LOG Severity ERROR Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. But no ports are disabled because the remote switch is not an adjacent to the local switch. Recommended Action Make sure that all the switches in the fabric have the same Base Switch attribute or disable VF mode for the conflicting switch using the fosConfig command. FABR-1046 Message Detected Base Switch conflict with neighbor switch (domain ), BS . E_Ports () connected to the switch are disabled. Message Type LOG Severity ERROR Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. All the E_Ports directly connected to the conflicting switch are disabled. Recommended Action Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the switch firmware to a VF-capable firmware. FABR-1047 Message Area unavailable to assign to the port. Persistently disabling port . Message Type LOG Severity INFO Probable Cause Indicates that there are no areas available to assign to the port during port creation. Recommended Action Move some ports out of the default switch to make areas available. Fabric OS Message Reference 317 53-1002749-01