Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 332

5 FABR-1018 FABR-1018 Message PSS principal failed (: ). Message Type LOG Severity WARNING Probable Cause Indicates that a failure occurred when trying to set the principal switch using the fabricPrincipal command. The message notifies you that the switch failed to become the principal switch because of one of the following reasons: • The switch joined an existing fabric and bypassed the F0 state. • The fabric already contains a principal switch that has a lower World Wide Name (WWN). Recommended Action Make sure that no other switch is configured as the principal switch. Force a fabric rebuild by using the switchDisable and switchEnable commands. Refer to the Fabric OS Command Reference for more information about the fabricPrincipal command. FABR-1019 Message Critical fabric size () exceeds supported configuration (). Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that this switch is a value-line switch and has exceeded the limited fabric size: that is, a specified limit to the number of domains. This limit is defined by your specific value-line license key. The fabric size has exceeded this specified limit, and the grace period counter has started. If the grace period is complete and the size of the fabric is still outside the specified limit, Web Tools is disabled. Recommended Action Bring the fabric size within the licensed limits. Either a full fabric license must be added or the size of the fabric must be changed to within the licensed limit. Contact your switch provider to obtain a full fabric license. FABR-1020 Message Web Tools will be disabled in days hours and minutes. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that this switch has a value-line license and has a limited number of domains. If more than the specified number of domains are in the fabric, a counter is started to disable Web Tools. This message displays the number of days left in the grace period. After this time, Web Tools is disabled. 310 Fabric OS Message Reference 53-1002749-01