Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 883

TRCE-1010 5 TRCE-1010 Message Traced fails to start. Message Type LOG Severity ERROR Probable Cause Indicates that the trace daemon (traced), which is used for transferring trace files has failed to start. The trace capability within the switch is unaffected. The system automatically restarts the traced facility after a brief delay. Recommended Action Reboot the CP (dual-CP system) or restart the switch. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1011 Message Trace dump manually transferred to target ' ': . Message Type LOG Severity INFO Probable Cause Indicates that the trace dump files were manually transferred to the specified slot. Recommended Action No action is required. TRCE-1012 Message The system was unable to retrieve trace information from slot . Message Type LOG Severity WARNING Probable Cause Indicates that the system was unable to retrieve trace information from the specified slot because there is no communication between the main system and the specified slot. Recommended Action Make sure the blade is enabled and retry the command. If the blade is already enabled, execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 861 53-1002749-01