Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 641

MS-1005 5 MS-1005 Message MS Invalid CT Response from d=. Message Type LOG Severity ERROR Probable Cause Indicates that the Management Server (MS) received an invalid common transport (CT) response from the switch domain. MS expects either a CT accept IU or a reject IU; the MS received neither response, which violates the Fibre Channel - Generic Services (FS-GS) specification. Recommended Action Check the integrity of the FC switch at the specified domain. It is not sending correct MS information as defined by the Fibre Channel - Framing and Signaling (FC-FS) standard. MS-1006 Message MS Unexpected iu_data_sz=. Message Type LOG Severity ERROR Probable Cause Indicates that the Management Server (MS) received an information unit (IU) data of unexpected size. The IU payload and the IU size may be inconsistent with each other or with the command that is currently being processed. Recommended Action Wait a few minutes and try the operation again. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. MS-1008 Message MS Failure while initializing . Message Type LOG Severity ERROR Probable Cause Indicates that the Management Server (MS) failed while initializing the specified action. This message is often transitory. The action can be one of the following: • while writing to ms_els_q: MS is unable to write a message to the MS Extended Link Service Queue. • while inserting timer to timer list: MS is unable to add a timer to a resource. Recommended Action If the error persists, check the available memory on the switch using the memShow command. Fabric OS Message Reference 619 53-1002749-01