Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 174

5 AUTH-1029 Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1029 Message Failed to get for message: port , retval . Message Type LOG Severity ERROR Probable Cause Indicates that the authentication process failed to get a particular authentication value at a certain phase. Usually this problem is transient. The authentication may fail. The Data type is the payload or structure that failed to get memory. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1030 Message Invalid message code for message: port . Message Type LOG Severity ERROR Probable Cause Indicates that the receiving payload does not have a valid message code for a particular authentication phase. Usually this problem is transient. The authentication may fail. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1031 Message Failed to retrieve secret value: port . Message Type LOG Severity ERROR Probable Cause Indicates that the secret value was not set properly for the authenticated entity. 152 Fabric OS Message Reference 53-1002749-01