Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 750

5 SEC-1170 SEC-1170 Message This command must be executed on the Primary FCS switch, the first reachable switch in the FCS list. Message Type LOG Severity INFO Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1171 Message Disabled secure mode due to invalid security object. Message Type LOG Severity ERROR Probable Cause Indicates the switch is segmented, and secure mode is disabled on the switch because there was no license present or no public key infrastructure (PKI) objects. Recommended Action Run the secCertUtil show -fcapall command to determine whether all PKI objects exist. If they do not exist, run the secCertUtil command to create them for the switch. Run the licenseAdd command to install the required license key. Contact your switch supplier to obtain a license if you do not have one. SEC-1172 Message Failed to identify role. Message Type LOG Severity ERROR Probable Cause Indicates the switch is unable to determine its role (primary FCS or backup FCS) in the secure fabric. Recommended Action Verify all switches in the fabric are in time synchronization with the primary FCS and that no external entity is trying to access the fabric. When verification is complete, retry the operation. 728 Fabric OS Message Reference 53-1002749-01