Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 405

FICN-1030 5 FICN-1030 Message HostDiskIng:FICON Purge received:Path=0x. Message Type LOG Severity ERROR Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1031 Message HostDiskIng:FICON System Reset received on Path=0x**. Message Type LOG Severity WARNING Probable Cause Indicates the FICON channel sent a System Reset to the disk control unit. Recommended Action No action is required. The MVS system was either set to initial program load (IPL) or performing error recovery. FICN-1032 Message HostDiskIng:XRC Read Channel Extender Capabilities detected on Path: 0x. Message Type LOG Severity INFO Probable Cause Indicates the eXtended Remote Copy (XRC) System Data mover was restarted to discover the capabilities of the channel extension equipment. Recommended Action No action is required. This is a part of the XRC initialization. Fabric OS Message Reference 383 53-1002749-01