Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 867

SWCH-1007 5 SWCH-1007 Message Switch port disabled due to \"\". Message Type LOG Severity WARNING Probable Cause Indicates that the switch port is disabled due to the reason displayed in the message. Recommended Action Based on the disable reason displayed, take appropriate action to restore the port. If the disable reason is "Insufficient frame buffers", reduce the distance or speed settings for the port to reduce the buffer requirement of the link. Alternatively, one or more ports in the port group must be disabled to make more buffers available for the link. Refer to the Fabric OS Administrator's Guide for more information. SWCH-1008 Message are port swapped on ports that do not support port swap. Slot will be faulted. Message Type LOG Severity WARNING Probable Cause Indicates that the blade enabled with the port configuration that does not support port swap. Recommended Action Replace the blade with ports that support port swap. Then swap ports back to the port's default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. SWCH-1009 Message Shared area having Trunk Area (TA) enabled on slot . Shared areas that have TA enabled will be persistently disabled. Message Type LOG Severity WARNING Probable Cause Indicates that the blade is enabled with a port configuration that had Trunk Area previously enabled on the shared area port. Recommended Action Disable Trunk Area on ports that had Trunk Area enabled previously. Refer to the Fabric OS Administrator's Guide for more information. Fabric OS Message Reference 845 53-1002749-01