Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 199

BL-1041 5 BL-1041 Message Dynamic area mode is enabled on default switch, Faulting the blade w/ ID in slot as it does not support this mode. Message Type LOG Severity CRITICAL Probable Cause Indicates that the blade does not support dynamic area mode on the default switch. Recommended Action Turn off the dynamic area mode using the configure command. BL-1045 Message mini SFP+ (SN: ) is only supported in certain high port count blades, not blade in slot w/ ID . Message Type LOG Severity ERROR Probable Cause Indicates that mini-SFP+ is supported only by a certain type of blade (FC8-64), but it can be inserted in other blades. Recommended Action Replace the mini-SFP+ with an SFP or SFP+. BL-1046 Message error on SFP in Slot /Port (). Try reseating or replacing it. Message Type LOG Severity ERROR Probable Cause Indicates that the checksum in an area on the small form-factor pluggable (SFP) transceiver does not match with the computed value, or there is problem accessing the data. Recommended Action Reseat the SFP transceiver. If problem persists, replace the SFP transceiver. Fabric OS Message Reference 177 53-1002749-01