Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 695

RCS-1004 5 RCS-1004 Message Application() not registered.(). Message Type LOG Severity ERROR Probable Cause Indicates that the specified application did not register with reliable commit service (RCS). Recommended Action Run the haShow command to view the HA state. Run the haDisable and haEnable commands. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. RCS-1005 Message Phase , Application returned , 0x. Message Type LOG Severity INFO Probable Cause Indicates that a receiving switch is rejecting the specified reliable commit service (RCS) phase. Recommended Action If the reject is in the acquire change authorization (ACA) phase, wait for several minutes and then retry the operation from the sender switch. If the reject is in the stage fabric configuration (SFC) phase, check if the application license exists for the local domain and if the application data is compatible. RCS-1006 Message State , Application AD, RCS CM. Domain returned 0x. App Response Code . Message Type LOG Severity INFO Probable Cause Indicates that the specified domain rejected a reliable commit service (RCS) phase initiated by an application on the local switch. • If the reject phase is acquire change authorization (ACA), the remote domain may be busy and could not process the new request. • If the reject phase is stage fabric configuration (SFC), the data sent by the application may not be compatible or the domain does not have the license to support that application. Fabric OS Message Reference 673 53-1002749-01