Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 206

5 BM-1007 Recommended Action Configure the blade so that it will persistently enable the ports. BM-1007 Message If set, clear EX/VEX/FC Fastwrite configuration for all ports for blade in slot . Message Type LOG Severity INFO Probable Cause Indicates the specified blade was detected for the first time after an FR4-18i was previously configured in the same slot. The new blade requires the specified port configurations to be cleared. Recommended Action No action is required. The blade ports are cleared automatically. BM-1008 Message Download of blade firmware failed for blade in slot . Reissue firmwaredownload to recover. Message Type LOG Severity WARNING Probable Cause Indicates that the automatic firmware upgrade on the blade failed because the blade firmware version was detected to be different from the control processor (CP) firmware version. Recommended Action Execute the firmwareDownload command to recover the blade. BM-1009 Message Firmwaredownload timed-out for application processor. Faulting switch. Message Type LOG Severity WARNING Probable Cause Indicates that the firmware download on the application processor (AP) blade failed. Recommended Action Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade. 184 Fabric OS Message Reference 53-1002749-01