Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 673

PLAT-1000 5 PLAT Messages PLAT-1000 Message . Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that nonrecoverable peripheral component interconnect (PCI) errors have been detected. Recommended Action The system will be faulted and may automatically reboot. If the system does not reboot automatically, reboot the system manually using the reboot command. Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PLAT-1001 Message CP resetting other CP (double reset may occur). Message Type LOG Severity INFO Probable Cause Indicates the other control processor (CP) is being reset. This message is typically generated by a CP that is in the process of becoming the active CP. Note that in certain circumstances a CP may experience a double reset and reboot twice. A CP can recover automatically even if it has rebooted twice. Recommended Action No action is required. PLAT-1002 Message CP: CP Fence 0x 0x CP Error 0x. Message Type LOG Severity CRITICAL Probable Cause Indicates that the control processor (CP) cannot access the inter-integrated circuit (I2C) subsystem because of an error condition or because of being fenced or isolated from the I2C bus. Recommended Action Reboot the CP if it does not reboot automatically. Reseat the CP if rebooting does not solve the problem. If the problem persists, replace the CP. Fabric OS Message Reference 651 53-1002749-01