Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 912

5 ZEUS-1004 ZEUS-1004 Message S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. Message Type LOG Severity ERROR Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Reboot the system at the next maintenance window. If the problem persists, replace the blade. ZEUS-1005 Message S,C,A: Memory allocation failed. Message Type LOG Severity ERROR Probable Cause Indicates a memory allocation failure in the software. Recommended Action Restart the system at the next maintenance window. If the problem persists, replace the control processor (CP) blade. ZEUS-1015 Message Port re-initialized due to Link Reset failure on internal Port S,P(). Message Type LOG Severity WARNING Probable Cause Indicates that the port was re-initialized due to link reset failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. 890 Fabric OS Message Reference 53-1002749-01