Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 674

5 PLAT-1003 PLAT-1003 Message Slot C/BE: 0x ADBUS: 0x misc_intr 0x. Message Type LOG | FFDC Severity CRITICAL Probable Cause Indicates that peripheral component interconnect (PCI) bus hang was detected. Recommended Action Replace the field-replaceable unit (FRU). PLAT-1004 Message Switch has older FPGA rev 0x. Upgrade to newer rev 0x using the fpga_update command. Message Type LOG | FFDC Severity CRITICAL Probable Cause Indicates that Fabric OS has older field-programmable gate array (FPGA) version. This message is applicable only to Brocade 5470. Recommended Action Upgrade FPGA to new version. PLAT-1072 Message The chassis is disabled because no Core Blades are available. Insert/replace one or both Core Blades and run chassisenable. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the chassis has been disabled because of the unavailability of the core blades. There must be at least one core blade in enabled state for the chassis to be considered ready. All core blades are either missing, faulted, or powered off. This results in all logical switches (and ports) being disabled. Recommended Action Make sure that all core blade slots have core blades inserted and their ejector switches are closed. Power on core blades that are powered off, and power cycle or replace the core blades that are faulted. Run the chassisenable command to re-enable the ports. Running the fastboot or reboot command will also result in enabling the logical switches and ports. 652 Fabric OS Message Reference 53-1002749-01