Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 223

C3-1026 5 C3-1026 Message S,P(): Faulting F_port due to extra credit detected:ftx= curr_cred= actual_cred=. Message Type LOG Severity WARNING Probable Cause Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames. Recommended Action When this error is observed persistently, replace the device. C3-1027 Message Detected credit loss on Peer internal Port of Slot , Port () vc_no= crd(s)lost= complete_loss:. Message Type LOG Severity INFO Probable Cause Indicates that credit loss was detected on the peer port. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1028 Message Detected excessive Link resets on the port in a second. Slot , Port (). Message Type LOG Severity WARNING Probable Cause Indicates that the port received excessive link resets from peer port within 1 second and that exceeded the threshold. Recommended Action When this error is observed persistently, change the small form-factor pluggable (SFP) transceiver or the cable on the peer port to which this port is connected. Fabric OS Message Reference 201 53-1002749-01