Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 482

5 FW-1162 FW-1162 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of link failures that the port experiences has risen above the high boundary. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Losses of synchronization commonly cause link failures. If you receive concurrent loss of synchronization errors, troubleshoot the loss of synchronization. FW-1163 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of link failures that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended Action Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1164 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of synchronization losses that the port experiences has changed. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. 460 Fabric OS Message Reference 53-1002749-01