Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 736

5 SEC-1102 SEC-1102 Message Fail to download . Message Type LOG Severity ERROR Probable Cause Indicates the switch failed to download a certificate, security database, or policies. This can happen when the switch does not get enough resources to complete the operation, the fabric has not stabilized, or the policy database is an invalid format. Recommended Action Wait for the fabric to become stable and then retry the operation. If the policy database is in an illegal format (with configDownload command), correct the format and retry the operation. SEC-1104 Message Fail to get primary . Message Type LOG Severity ERROR Probable Cause Indicates the switch failed to get either the primary certificate or a primary public key. Recommended Action Verify the primary switch has a valid certificate installed and retry the operation. If a valid certificate is not installed, install a certificate by following the procedure specified in the Fabric OS Administrator's Guide. SEC-1105 Message Fail to disable secure mode on all switches. Message Type LOG Severity ERROR Probable Cause Indicates the switch failed to disable security in the fabric. This could happen if the switch cannot get the required resources to complete the command, and sending to a remote domain fails or the remote domain returns an error. Recommended Action Run the secFabricShow to verify that all switches in the fabric are in the ready state. Retry the command when all switches are ready. 714 Fabric OS Message Reference 53-1002749-01