Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 220

5 C3-1015 C3-1015 Message Port re-initialized due to Link Reset failure on internal Port S,P(). Message Type LOG Severity WARNING Probable Cause Indicates that the specified port is re-initialized due to link reset failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1016 Message Port is faulted due to port re-initialization failure on internal Port S,P() with reason . Message Type LOG Severity ERROR Probable Cause Indicates that the specified port failed due to port re-initialization failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1017 Message Blade in Slot- failed due to unavailability of ports in the internal trunk. Message Type LOG Severity ERROR Probable Cause Indicates that the specified blade failed because of the unavailability of the ports in the internal trunk. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. 198 Fabric OS Message Reference 53-1002749-01