Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 597

IPS-1001 5 IPS Messages IPS-1001 Message FTR_AFA/FTR_AE License Not Installed (). Message Type LOG Severity WARNING Probable Cause Indicates that either Advanced FICON Acceleration (FTR_AFA) or Advanced Extension (FTR_AE) license is not installed or assigned to the slot. Recommended Action Run the licenseShow command to verify the slot-based licenses are installed on the switch. Contact your switch supplier for an appropriate slot-based license. Run the licenseAdd and licenseSlotCfg commands to add the license to your switch and activate it. IPS-1002 Message Failed to initialize rc = . Message Type LOG Severity ERROR Probable Cause Indicates that the initialization of a module within the IPS daemon failed. Recommended Action Download a new firmware version using the firmwareDownload command. IPS-1003 Message : Failed to allocate memory while performing . Message Type LOG Severity WARNING Probable Cause Indicates that memory resources are low. This may be a transient problem. Recommended Action Check the memory usage on the switch using the memShow command. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 575 53-1002749-01