Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 881

TRCE-1004 5 Recommended Action If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1004 Message Trace dump was not transferred because trace auto-FTP disabled. Message Type LOG Severity WARNING Probable Cause Indicates that trace dump files have been created on the switch or the specified slot, but the trace dump files were not automatically transferred from the switch because auto-FTP is disabled. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1005 Message FTP Connectivity Test failed due to error. Message Type LOG Severity ERROR Probable Cause Indicates that the connectivity test to the FTP host failed because of reasons such as a wrong FTP address, FTP site is down, network is down, and so on. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1006 Message FTP Connectivity Test succeeded to FTP site ' '. Message Type LOG Severity INFO Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled using the supportftp -t command. Recommended Action No action is required. Fabric OS Message Reference 859 53-1002749-01