Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 923

ZONE-1046 5 Recommended Action No action is required. ZONE-1046 Message The Default Zone access mode is already set to All Access. Message Type LOG Severity INFO Probable Cause Indicates that the Default Zone access mode is already set to All Access. Recommended Action No action is required. ZONE-1048 Message ZONE ACA is rejected on the standby. Message Type LOG Severity WARNING Probable Cause Indicates that the standby zoning component did not receive a syncdump command from the primary side. Recommended Action Synchronize the standby control processor (CP) using the haSyncStart command. ZONE-1049 Message ZONE AD-DefZone conflict detected while system initialization. Message Type LOG Severity ERROR Probable Cause Indicates that there is an Admin Domain (AD) Default Zone conflict. Recommended Action Verify that the default zoning mode for AD0 is set to No Access using the defzone --show command. If the default zoning mode is not set to No Access, execute the defzone --noaccess command and then execute the cfgsave command to commit the default zone mode change. Fabric OS Message Reference 901 53-1002749-01