Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 640

5 MS-1003 MS-1003 Message MS detected Unstable Fabric(). Message Type LOG Severity INFO Probable Cause Indicates that the Management Server (MS) detected an unstable fabric; the command or operation may not be successfully completed. This message is often transitory. The message string value can be one of the following: • DOMAIN_INVALID for a req from: The domain is invalid for a request. • No WWN for: Unable to acquire the World Wide Name (WWN) for the corresponding domain. The domain number is the target domain that caused error. Recommended Action The fabric may be reconfiguring, forming, or merging. Wait a few minutes and try the operation again. Execute the fabricShow command or the secFabricShow command to verify that the number of domains matches the Management Server known domains. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. MS-1004 Message MS detected ONLY 1 Domain(d=). Message Type LOG Severity INFO Probable Cause Indicates that the Management Server (MS) detected an unstable count of domains in its own local resource. This message is often transitory. Recommended Action The fabric may be reconfiguring, forming, or merging. Wait a few minutes and try the operation again. Execute the fabricShow command or the secFabricShow command to verify that the number of domains matches the Management Server known domains. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 618 Fabric OS Message Reference 53-1002749-01