Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 919

ZONE-1028 5 ZONE-1028 Message Commit zone DB larger than supported - greater than . Message Type LOG Severity WARNING Probable Cause Indicates that the zone database size is greater than the limit allowed by the fabric. The limit of the zone database size depends on the lowest level switch in the fabric. Older switches have less memory and force a smaller zone database for the entire fabric. Recommended Action Execute the cfgSize command to view the zone database size information. Edit the zone database to keep it within the allowable limit for the specific switches in your fabric. ZONE-1029 Message Restoring zone cfg from flash failed - bad config saved to []. Message Type LOG Severity WARNING Probable Cause Indicates that the zone configuration restored from the flash memory was faulty. This error will save the faulty zone configuration in the zoned core file directory. Recommended Action If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. ZONE-1034 Message A new zone database file is created. Message Type LOG Severity INFO Probable Cause Indicates that a new zone database file has been created. Recommended Action No action is required. Fabric OS Message Reference 897 53-1002749-01