Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 363

FCPD-1001 5 FCPD Messages FCPD-1001 Message Probing failed on . Message Type LOG Severity WARNING Probable Cause Indicates that a Fibre Channel Protocol (FCP) switch probed devices on a loop port, and probing failed on the L_Port, arbitrated loop physical address (AL_PA), or the F_Port. For ALPA, the valid range is 0x00 through 0xFF. The error variable can be either of the following: • L_Port port_number ALPA alpa_number • F_Port port_number This could happen due to some firmware issue with the device controller on the specified port. Recommended Action Contact the device vendor for any firmware-related issues. Also, consider upgrading the device firmware. FCPD-1002 Message port , bad R_CTL for fcp probing: 0x. Message Type LOG Severity WARNING Probable Cause Indicates that the response frame received on the specified port for an inquiry request contains an invalid value in the routing control field. This could happen due to some firmware issue with the device controller on the specified port. Recommended Action Contact the device vendor for any firmware-related issues. Also, consider upgrading the device firmware. FCPD-1003 Message Probing failed on which is possibly a private device which is not supported in this port type. Message Type LOG Severity INFO Probable Cause Indicates that device probing has failed because private devices will not respond to the switch port login (PLOGI) during probing. Fabric OS Message Reference 341 53-1002749-01