Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 890

5 UCST-1003 UCST Messages UCST-1003 Message Duplicate Path to Domain , Output Port = , PDB pointer = 0x. Message Type LOG Severity INFO Probable Cause Indicates that duplicate paths were reported to the specified domain from the specified output port. The PDB pointer value displayed in the message is the address of the path database and provides debugging information. Recommended Action No action is required. UCST-1007 Message Inconsistent route detected: Port = , should be . Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed is what the hardware has configured and the second port number displayed is what the protocol is using. Recommended Action Run the switchDisable command and then the switchEnable command to reset the routing database. Run the uRouteShow command to display the new routing tables. UCST-1020 Message Static route (input-area: , domain: output-area: ) has been ignored due to platform limitation. Message Type LOG Severity WARNING Probable Cause Indicates that the configured static route cannot be applied to the routing database because of a platform limitation. Recommended Action No action is required. 868 Fabric OS Message Reference 53-1002749-01