Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 476

5 FW-1126 • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1126 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of segmentations has fallen below the low boundary. Segmentation changes might occur due to the following reasons: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. A low number of segmentation errors means that the fabric is functioning normally. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1127 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of segmentations has risen above the high boundary. Segmentation changes might occur due to the following reasons: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. 454 Fabric OS Message Reference 53-1002749-01