Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 572

5 HIL-1107 HIL-1107 Message Switch faulted, () above threshold. System preparing for reset. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the switch voltage is above threshold. This message is specific to non-bladed switches. Recommended Action For switches that do not have field-replaceable units (FRUs), replace the entire switch. If the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the entire switch. HIL-1108 Message Switch faulted, () below threshold. System preparing for reset. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the switch voltage is below threshold. This message is specific to non-bladed switches. Recommended Action For switches that do not have field-replaceable units (FRUs), replace the entire switch. If the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the entire switch. HIL-1201 Message Blower , speed ( RPM) above threshold. Message Type LOG Severity WARNING Probable Cause Indicates that the fan speed (in RPM) has risen above the maximum threshold. A high speed does not necessarily mean that the fan is faulty. Recommended Action Run the tempShow command to verify that the switch temperatures are within operational ranges. Refer to the hardware reference manual for the temperature range of your switch. Make sure that the area is well-ventilated and that the room temperature is within the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan continues to generate this message, replace the fan FRU. 550 Fabric OS Message Reference 53-1002749-01