Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 387

FCR-1072 5 FCR-1072 Message Port is changed from FCR port to non FCR port. Message Type LOG Severity INFO Probable Cause Indicates that the port is no longer an EX_Port or VEX_Port. Recommended Action No action is required. FCR-1073 Message Switch with domain ID in fabric has lower limit of LSAN Zones supported. Message Type LOG Severity INFO Probable Cause Indicates that an older version switch in the backbone or edge that supports a different limit of logical storage area network (LSAN) zones was detected. Recommended Action Use the fcrResourceShow command on all Fibre Channel Routers in the Meta-SAN to find lowest supported LSAN zone limits. Ensure the total number of LSAN zones in the Meta-SAN are within the lowest supported limit of LSAN zones. FCR-1074 Message HA sync lost as remote CP supports only LSAN Zones. Message Type LOG Severity ERROR Probable Cause Indicates that the remote control processor (CP) has older firmware, which supports a lower number of logical storage area network (LSAN) zones. This is causing the loss of high availability (HA) sync. Recommended Action Keep the number of LSAN zones to the lower limit of the two CPs or upgrade the remote CP. Fabric OS Message Reference 365 53-1002749-01