Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 191

BL-1016 5 BL-1016 Message Blade port in slot failed to enable. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the specified blade port could not be enabled. Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1017 Message Slot Initializing... Message Type LOG Severity INFO Probable Cause Indicates that the slot has started initializing the ports. Recommended Action No action is required. BL-1018 Message Slot Initialization completed. Message Type LOG Severity INFO Probable Cause Indicates that the slot has completed initializing the ports. Recommended Action No action is required. Fabric OS Message Reference 169 53-1002749-01