Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 665

PDM-1004 5 PDM-1004 Message PDM memory shortage. Message Type LOG Severity WARNING Probable Cause Indicates that the Parity Data Manager (PDM) process ran out of memory. Recommended Action Reboot or power cycle the switch. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1005 Message FSS register failed. Message Type LOG Severity WARNING Probable Cause Indicates that the Parity Data Manager (PDM) failed to register with the Fabric OS synchronization service (FSS). Recommended Action Execute the firmwareDownload command to reinstall the firmware. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1006 Message Too many files in sync.conf. Message Type LOG Severity WARNING Probable Cause Indicates that the sync.conf configuration file contains too many entries. Recommended Action Execute the firmwareDownload command to reinstall the firmware. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 643 53-1002749-01