Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 463

FW-1010 5 FW-1010 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the power supply is faulty. The power supply is not producing enough power. Recommended Action Verify that you have installed the power supply correctly and that it is correctly seated in the chassis. If the problem persists, replace the faulty power supply. FW-1011 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the power supply is functioning properly. Recommended Action Set the high boundary above the normal operation range. FW-1012 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the power supply counter changed from a value outside of the acceptable range to a value within the acceptable range. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Fabric OS Message Reference 441 53-1002749-01