Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 454

5 FSS-1001 FSS Messages FSS-1001 Message Component () dropping HA data update (). Message Type LOG Severity WARNING Probable Cause Indicates that an application has dropped a high availability (HA) data update. Recommended Action For a dual control processor (CP) system, enable the HA state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1002 Message Component () sending too many concurrent HA data update transactions (). Message Type LOG Severity WARNING Probable Cause Indicates that an application has sent too many concurrent high availability (HA) data updates. Recommended Action For a dual CP system, enable the HA state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1003 Message Component () misused the update transaction () without marking the transaction begining. Message Type LOG Severity WARNING Probable Cause Indicates that the Fabric OS state synchronization (FSS) service has dropped the update because an application did not set the transaction flag correctly. Recommended Action For a dual CP system, enable the high availability (HA) state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 432 Fabric OS Message Reference 53-1002749-01