Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 916

5 ZONE-1015 ZONE-1015 Message Not owner of the current transaction . Message Type LOG Severity WARNING Probable Cause Indicates that a zoning change operation is not allowed because the zoning transaction is opened by another task. Indicates concurrent modification of the zone database by multiple administrators. Recommended Action Wait until the previous transaction is completed. Verify that only one administrator is working with the zone database at a time. ZONE-1017 Message FA Zone() contains incorrect number of Initiator and Target devices. Message Type LOG Severity ERROR Probable Cause Indicates that the fabric assist (FA) zoning configuration has more than one initiator. This is because of incorrect entries in the FA zoning configuration. Recommended Action Edit the zone database to make sure that only one initiator is set for each FA zone configuration. ZONE-1019 Message Transaction Commit failed. Reason code () \"\". Message Type LOG Severity ERROR Probable Cause Indicates that reliable commit service (RCS) had a transmit error. RCS is a protocol used to transmit changes to the configuration database within a fabric. Recommended Action Often this message indicates a transitory problem. Wait a few minutes and retry the command. Make sure your changes to the zone database are not overwriting the work of another administrator. Execute the cfgTransShow command to determine if there is any outstanding transaction running on the local switches. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 894 Fabric OS Message Reference 53-1002749-01