Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 726

5 SEC-1072 SEC-1072 Message Policy List is Empty. Message Type LOG Severity ERROR Probable Cause Indicates the specific policy type is empty. The security database is corrupted for unknown reasons. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1073 Message No FCS policy in list. Message Type LOG Severity ERROR Probable Cause Indicates the specific policy type is empty. The security database is corrupted for unknown reasons. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1074 Message Cannot execute the command on this switch. Please check the secure mode and FCS status. Message Type LOG Severity ERROR Probable Cause Indicates a security command was run on a switch that is not allowed to run it either because it is in non-secure mode or because it does not have the required fabric configuration server (FCS) privilege. Recommended Action If a security operation that is not allowed in non-secure mode is attempted, do not perform the operation in non-secure mode. In secure mode, run the command from a switch that has the required privilege; that is, either a backup FCS or primary FCS. 704 Fabric OS Message Reference 53-1002749-01