Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 328

5 FABR-1006 FABR-1006 Message Node free error, caller: . Message Type LOG Severity WARNING Probable Cause Indicates that the Fabric OS is trying to free or deallocate memory space that has already been deallocated. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe memory corruption, the system may recover by performing an automatic failover. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1007 Message IU free error, caller: . Message Type LOG Severity WARNING Probable Cause Indicates that a failure occurred when deallocating an information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe memory corruption, the system may recover by performing an automatic failover. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1008 Message . Message Type LOG Severity WARNING Probable Cause Indicates that errors occurred during the request domain ID state; the information unit cannot be allocated or sent. If this message occurs with FABR-1005, the problem is usually transitory. Otherwise, this message is rare and usually indicates a problem with the Fabric OS. The error descriptions are as follows: • FAB RDI: cannot allocate IU • FAB RDI: cannot send IU Recommended Action No action is required if the message appears with the FABR-1005 message. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. 306 Fabric OS Message Reference 53-1002749-01