Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 494

5 FW-1197 FW-1197 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of link resets that the port experiences has fallen below the low boundary level. Link resets occur due to link timeout errors that indicate no frame activity. A low number of link resets means that the switch is functioning normally. Recommended Action Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1198 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of link resets that the port experiences has increased above the high boundary level. Link resets occur due to link timeout errors that indicate no frame activity. Both physical and hardware problems can cause link resets to increase. Recommended Action Check both ends of your cable connection. Verify if the cable and small form-factor pluggables (SFPs) are faulty. FW-1199 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of link resets that the port experiences has changed from a value beyond the acceptable range to a value within the acceptable range. Link resets occur due to link timeout errors that indicate no frame activity. Both physical and hardware problems can cause link resets to increase. Recommended Action Respond to this message as is appropriate to the particular policy of the end-user installation. 472 Fabric OS Message Reference 53-1002749-01