Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 740

5 SEC-1116 SEC-1116 Message Fail to commit failover. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1117 Message Fail to set . Message Type LOG Severity INFO Probable Cause Indicates the switch failed to save the data received by the primary fabric configuration server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Action Run the fabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. SEC-1118 Message Fail to set SNMP string. Message Type LOG Severity INFO Probable Cause Indicates the SNMP string could not be set. Usually this problem is transient. Recommended Action Retry the command. 718 Fabric OS Message Reference 53-1002749-01