Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 868

5 SWCH-1010 SWCH-1010 Message Trunk Area (TA) enabled on slot with switch not in PID format 1. TA enabled ports will be persistently disabled. Message Type LOG Severity WARNING Probable Cause Indicates that the blade is enabled with the port configuration that had Trunk Area enabled previously. Recommended Action Disable Trunk Area on ports that had Trunk Area enabled previously. Refer to the Fabric OS Administrator's Guide for more information. SWCH-1011 Message HA out of sync: Stby CP (ver=) doesn't support Trunk Area functionality. (active ver=, TA enabled on sw=). Message Type LOG Severity WARNING Probable Cause Indicates that the standby control processor (CP) does not support Trunk Area functionality, but the switch has some ports with Trunk Area enabled. Recommended Action Load a firmware version on standby CP that supports Trunk Area functionality by using the firmwareDownload command. SWCH-1012 Message Trunk Area () has been enabled for one or more ports. Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates that a Trunk Area has been enabled for one or more ports and the configuration file has been updated. Recommended Action No action is required. 846 Fabric OS Message Reference 53-1002749-01