Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 177

AUTH-1037 5 AUTH-1037 Message Failed to response for : init_len , resp_len , port . Message Type LOG Severity ERROR Probable Cause Indicates that a Diffie Hellman - Challenge Handshake Authentication Protocol (DH-CHAP) authentication operation failed on the specified port due to mismatched response values between two entities. The error may indicate that an invalid entity tried to connect to the switch. Check the connection port for a possible security attack. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1038 Message Failed to retrieve certificate during : port . Message Type LOG Severity ERROR Probable Cause Indicates that the public key infrastructure (PKI) certificate is not installed properly. Recommended Action Reinstall the PKI certificate using the secCertUtil command. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1039 Message Neighboring switch has conflicting authentication policy: Port disabled. Message Type LOG Severity ERROR Probable Cause Indicates that the neighboring switch has a conflicting authentication policy enabled. The E_Port has been disabled because the neighboring switch has rejected the authentication negotiation, and the local switch has a strict switch authentication policy. Fabric OS Message Reference 155 53-1002749-01