Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 222

5 C3-1021 C3-1021 Message S,P(): Port is offline due to Encryption Compression Block error. Message Type LOG Severity WARNING Probable Cause Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action When this error occurs, the software will automatically recover from the error and no action is required. However, if the problem persists, replace the blade. C3-1023 Message Single RDY/Frame Loss detected and recovered on Slot ,Port () rdy(0x)/frame(0x). Message Type LOG Severity WARNING Probable Cause Indicates that above-normal errors are observed in hardware that may or may not impact the data traffic. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1025 Message S,P(): Extra credit on F_port:ftx= curr_cred= actual_cred=. Message Type LOG Severity WARNING Probable Cause Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames. Recommended Action When this error is observed persistently, replace the device. 200 Fabric OS Message Reference 53-1002749-01