Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 694

5 RCS-1001 RCS Messages RCS-1001 Message RCS has been disabled. Some switches in the fabric do not support this feature. Message Type LOG Severity INFO Probable Cause Indicates that the reliable commit service (RCS) feature has been disabled on the local switch because not all switches in the fabric support RCS or the switch is in non-native mode. Recommended Action Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. RCS-1002 Message RCS has been enabled. Message Type LOG Severity INFO Probable Cause Indicates that the reliable commit service (RCS) feature has been enabled. RCS must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. Recommended Action No action is required. RCS-1003 Message Failed to allocate memory: (). Message Type LOG Severity ERROR Probable Cause Indicates that the specified reliable commit service (RCS) function has failed to allocate memory. Recommended Action This message is usually transitory. Wait for few minutes and retry the command. Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. 672 Fabric OS Message Reference 53-1002749-01