Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 847

SULB-1001 5 SULB Messages SULB-1001 Message Firmwaredownload command has started. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the firmwareDownload command has been entered. This process should take approximately 17 minutes. The process is set to time out after 30 minutes. Recommended Action Do not fail over or power down the system during firmware upgrade. Allow the firmwareDownload command to continue without disruption. No action is required. Run the firmwareDownloadStatus command for more information. SULB-1002 Message Firmwaredownload command has completed successfully. Message Type AUDIT | LOG Class FIRMWARE Severity INFO Probable Cause Indicates that the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is required. The firmwareDownload command has completed as expected. Run the firmwareDownloadStatus command for more information. Run the firmwareShow command to verify the firmware versions. SULB-1003 Message Firmwarecommit has started. Message Type AUDIT | LOG Class FIRMWARE Severity INFO Probable Cause Indicates that the firmwareCommit command has been entered. Fabric OS Message Reference 825 53-1002749-01