Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 176

5 AUTH-1035 Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1035 Message Invalid length in message: length , port . Message Type LOG Severity ERROR Probable Cause Indicates that a particular data field in the authentication message has an invalid length field. This error usually relates to internal failure. Usually this problem is transient. The authentication may fail. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1036 Message Invalid state for : port . Message Type LOG Severity ERROR Probable Cause Indicates that the switch received an unexpected authentication message. Usually this problem is transient. The authentication may fail. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 154 Fabric OS Message Reference 53-1002749-01