Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 475

FW-1123 5 Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1123 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of domain ID changes has risen above the high boundary. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1124 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of domain ID changes has changed from a value outside of the acceptable range to a value within the acceptable range. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1125 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of segmentations has changed. Segmentation changes might occur due to the following reasons: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. Fabric OS Message Reference 453 53-1002749-01