Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 312

5 EM-1050 Recommended Action No action is required. EM-1050 Message FRU removal detected. Message Type LOG Severity INFO Probable Cause Indicates that a field-replaceable unit (FRU) of the type and location specified by the FRU ID value was removed from the chassis. Recommended Action Verify that the FRU was intended to be removed. If not, replace the FRU as soon as possible. EM-1051 Message : Inconsistency detected, FRU reinitialized. Message Type LOG Severity INFO Probable Cause Indicates that an inconsistent state was found in the field-replaceable unit (FRU). This occurs if the state of the FRU was changing during a failover. The FRU is reinitialized and the traffic may have been disrupted. Recommended Action No action is required. EM-1057 Message Blade: is getting reset:. Message Type LOG Severity WARNING Probable Cause Indicates that the blade is being automatically reset because of known resetable transient errors such as an application-specific integrated circuit (ASIC) parity error. Recommended Action No action is required if the switch does not reach the reset threshold for the switch or blade. If the reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be replaced. 290 Fabric OS Message Reference 53-1002749-01