Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 47

Reading the system messages 1 The fields in the error message are described in Table 5. TABLE 5 Audit message field description Variable name Description Sequence Number Audit flag Time Stamp Event ID Severity Event Class User ID Role IP address Interface Application Name Admin Domain Switch name Reserved field for future expansion Event-specific information The error message position in the log. Identifies the message as an Audit message. The system time (UTC) when the message was generated on the switch. The RASLog subsystem will support an internationalized time stamp format based on the "LOCAL" setting. The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all message numbers are used; there can be gaps in the numeric message sequence. The severity of the error, which can be one of the following: • 1 - CRITICAL • 2 - ERROR • 3 - WARNING • 4 - INFO The event class, which can be one of the following: • CFG • CLI • FABRIC • FIRMWARE • FW • LS • MAPS (internal use only) • RAS • SECURITY • ZONE The user ID. The role of the user ID. The IP address. The interface being used. The application name being used on the interface. The Admin Domain, if there is one. The defined switch name or the chassis name of the switch depending on the action; for example, HA messages typically show the chassis name and login failures show the logical switch name. This value is truncated if it is over 16 characters in length. Execute the chassisName command to name the chassis or the switchName command to rename the logical switch. This field is reserved for future use and contains a space character (null value). A text string explaining the error encountered and providing parameters supplied by the software at runtime. Fabric OS Message Reference 25 53-1002749-01