Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 619

LFM-1004 5 LFM-1004 Message HA is out of sync for opcode , error value . Message Type LOG | FFDC Severity CRITICAL Probable Cause Indicates loss of high availability (HA) sync with remote control processor (CP). Recommended Action Collect the supportsave information using the supportsave command and contact the Brocade technical support. LFM-1005 Message Logical port disabled with reason () Message Type LOG Severity WARNING Probable Cause Indicates that the specified logical port is disabled for an internal logging purpose. This could be due to port segmentation. Recommended Action Check the reason for port disable using the switchShow command, and take appropriate corrective action. LFM-1006 Message The switch with domain with firmware version has joined the FID fabric and may not be compatible with XISL use. Message Type LOG Severity WARNING Probable Cause Indicates that the firmware version on the specified switch is not compatible with XISL. Recommended Action Check the release notes to verify if this firmware is compatible with XISL. If it is not, remove the switch from the fabric. Fabric OS Message Reference 597 53-1002749-01