Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 888

5 TS-1006 TS-1006 Message . Message Type LOG Severity INFO Probable Cause Indicates that a time service event is occurring or has failed. The message can be one of the following: • Init failed. Time Service exiting - Initialization error, but the time server exits. • Synchronizing time of day clock - Usually logged during temporary operational issues when the clock goes out of synchronization. For example, when a time update packet is missed due to fabric reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it can be ignored. • Validating time update - Usually logged during temporary operational issues when a time update packet cannot be validated in a secure fabric. For example, during fabric reconfiguration or role change of the primary FCS switch. If the message does not recur, it can be ignored. Recommended Action No action is required. TS-1007 Message . Message Type LOG Severity WARNING Probable Cause Indicates that a switch is trying to set the clock server, which is not the primary fabric configuration server (FCS) across the fabric. A consistent FCS policy must be implemented across the fabric. Recommended Action Execute the secPolicyShow command to verify that the FCS policy is consistent across the fabric. TS-1008 Message Clock Server used instead of . Message Type LOG Severity WARNING Probable Cause Indicates that the source of fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch was changed to another configured clock server. This happens when the Network Time Protocol (NTP) query to the current active external clock server failed. 866 Fabric OS Message Reference 53-1002749-01