Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 335

FABR-1031 5 Recommended Action No action is required. FABR-1031 Message Maximum number of retries sending ILS from port exceeded. Message Type LOG | FFDC Severity WARNING Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service (ILS) to the iswitch daemon on the specified E_Port. Recommended Action Run the top command to see if iswitchd is extremely busy or if another process is using excessive CPU resources. FABR-1032 Message Remote switch with domain ID and switchname running an unsupported FOS version v2.x has joined the fabric. Message Type LOG Severity WARNING Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric. Recommended Action Remove the switch with the unsupported Fabric OS version 2.x from the fabric FABR-1034 Message Area have been acquired by port . Persistently disabling port . Message Type LOG Severity INFO Probable Cause Indicates you must enable Trunk Area on a port for another port to use the same area. Recommended Action Move the cable to a port area that is not in use, or disable Trunk Area. You must manually enable the port or the port remains disabled forever. Refer to the Fabric OS Administrator's Guide for more information. Fabric OS Message Reference 313 53-1002749-01