Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 218

5 C3-1009 C3-1009 Message S,P(): portcfglongdistance vc_translation_link_init = 1 overwrites fill word IDLE. ARB will be used on the link. Message Type LOG Severity WARNING Probable Cause Indicates that the portcfglongdistance vc_translation_link_init 1 command has overwritten the fill word IDLE. Arbitrated loop (ARB) will be used on the link. Recommended Action No action is required. C3-1010 Message S,C: Above normal hardware errors were observed: fault1:0x, fault2:0x thresh2:0x. Message Type LOG Severity CRITICAL Probable Cause Indicates that above-normal errors were observed in hardware that may or may not impact the data traffic. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1011 Message Detected a complete loss of credit on internal back-end VC: Slot , Port () vc_no= crd(s)lost=. Message Type LOG Severity WARNING Probable Cause Indicates that all credits have been lost on the specified virtual channel (VC) and port. Recommended Action Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. 196 Fabric OS Message Reference 53-1002749-01